Multiplexer Tutorial Study Material Notes with Examples

Multiplexer Tutorial Study Material Notes with Examples

Multiplexer

Multiplexing means transmitting a largo number of information units over a smaller number of channels or lines. A digital multiplexer is a combinational circuit that selects binary information from one of many input line and directs it to the output line. The selection of a particular input line is controlled by a set of selection line, Normally, there are 2n lines   and n selection lines whose bit combinations determine which input  is selected.

Multiplexer Tutorial Study Material Notes with Examples
Multiplexer Tutorial Study Material Notes with Examples

The Selection of inputs will be as of the above Table

When Si = 0 and So = 0. Output of gate 2, 3 and 4 will be 0, and the output of gate 1 will depend upon /0 (because So =1 and Si = 1, thus output of gate 1= /o • 1.1= /0)

HANDBOOK OF CS AND IT
HANDBOOK OF CS AND IT

Demultiplexer

A demultiPlexer is a circuit that receives information on a single line and transmit that information on one of  2n  possible output lines. The output line to which input will be transmitted is selected by the selection line.

 

HANDBOOK OF CS AND IT
HANDBOOK OF CS AND IT

Sequential Circuit

A switching circuit whose output depends not only on the present state of its input but also what its input conditions have been in the past.

Sequential logic output depends on stored levels and also the input  levels. The memory elements are capable of storing binary information.

A sequential circuit is specified by a time, sequence of inputs, output and internal states.

Key Points

There are two types of sequential circuits. This classification depends on the timing of their signals.

  • Asynchronous sequential circuits
  • Synchronous sequential circuits

Asynchronous Sequential Circuits

This is a system whose outputs depend upon the order in which its input variable change and can be affected at any instant of time.

Synchronous Sequential Circuits

These circuits have a clock signal as one of their inputs to force the change in output only  at discrete instance of time. As state transition in such circuits occurs only when the clock value is either 0 or 1 or happen at rising or falling edge of the clock.

The memory element used in the synchronous sequential circuits is called flip-flops.


Sorting in Design and Analysis of Algorithm Study Notes with Example

Follow Us On Cyber Point Solution Youtube Channel : Click Here

Follow Us on Social Platforms to get Updated : twiter,  facebookGoogle Plus

Learn More Ethical Hacking and Cyber Security click on this link. cyber security

Leave a Reply

Your email address will not be published. Required fields are marked *